MANUFACTURER OF ASTM A182 F317 LAP JOINT FLANGES, SS 317L THREADED FLANGES, STAINLESS STEEL 317 SORF FLANGES, READY STOCK OF SS 317 FLANGES, 317L SS LONG WELD NECK FLANGES SUPPLIER

Hariom Steel is a recognised manufacturer and trader of SS 317 / 317L Flanges, whichare commonly utilized when selecting a stainless steel that must withstand corrosive conditions. Stainless Steel UNS S31700 Lap Joint Flanges is very resistant to corrosion caused by dry chlorine and hydrogen chloride gas. The product's controlled chemical composition restrictions are used in the nuclear industry to avoid the possibility of stress corrosion cracking caused by high purity water containing chloride ions. Stainless Steel WNR1.4449 Puddle Flanges is resistant to water corrosion and has a high mechanical strength. This alloy's composition is a face-centered-cubic solid solution with exceptional metallurgical stability. It forms a firmly adhering oxide scale that withstands even extreme heat cycling. The existence of this alloy may create some misunderstanding, especially as the names and formulae are almost identical.

Stainless Steel 317/317L Flanges Specifications

Size Chart1/2" (15 NB) to 48" (1200NB) DN10~DN5000
StandardsANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092
Pressure RatingClass 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Pressure Calculation in DIN6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64
UNI6Bar 10Bar 16Bar 25Bar 40Bar
EN6Bar 10Bar 16Bar 25Bar 40Bar
CoatingOil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized
Most common typesForged / Threaded / Screwed / Plate
Test CertificatesEN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Production TechniqueForged, Heat treated and machined
Connect Type/ Flange Face TypeRaised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove
Special design

As per your drawing

AS, ANSI, BS, DIN and JIS
15 NB (1/2") to 200 NB (8")
Equal and Reducing Configurations

TestDirect-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
EquipmentPress machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc
Manufacturer of

ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
-BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange

B.S: BS4504 , BS3293, BS1560, BS10
AS 2129: Table D; Table E; Table H
ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
American standard (ANSI)
German (DIN)
British standard (BS)

DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638 ASTM A182 F317/317L Stainless Steel Flanges
The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203; UNI2276

SS 317/317L Flanges Equivalent Grades

STANDARDUNSWERKSTOFF NR.AFNORENJISBSGOST
SS 317S317001.4449-----
SS 317LS317031.4438-----

Stainless Steel 317/317L Flanges Chemical Composition

STANDARDCMNSIPSCRNIMON
SS 3170.08 max.2.00 max.1.00 max.0.045 max.0.03 Max.18.0 - 20.011.0 - 14.03.0 - 4.0-
SS 317L0.03 max.2.00 max.0.75 max.0.045 max.0.03 max.18.0 - 20.011.0 - 15.03.0 - 4.00.1

317/317L Stainless Steel Flanges Mechanical Properties

Grade

Tensile Strength (MPa) minYield Strength 0.2% Proof (MPa) minElongation (% in 50mm) minHardness
Rockwell B (HR B) maxBrinell (HB) max
317/317L5152054095217

Weight Chart Of Stainless Steel 317/317L Flanges

Pipe Normal Diam.O.D. Flange Thk. Of Flange Min Diam.
of
Hub 		Diameter of Raised Face Length Hub.YThread LengthDiam. 
of Bolt
Circle		Diam. 
of Bolt
Holes		Number
of Bolts		Diam. of
Bolts
(inch)		KGLB
inchdnOCXGYTBCBHBNBD
1/2"1589.0011.2030.2035.1015.7015.7060.5015.8041/2"0.40.9
3/4"2098.5012.7038.1042.9015.7015.7069.9015.8041/2"0.71.5
1"25108.0014.2049.3050.8017.5017.5079.3015.8041/2"0.81.8
1-1/4"32117.5015.7058.7063.5020.6020.6088.9015.8041/2"1.22.6
1-1/2"40127.0017.5065.0073.2022.4022.4098.6015.8041/2"1.53.3
2"50152.5019.1077.7091.9025.4025.40120.7019.1045/8"2.35.1
2-1/2"65178.0022.4090.40104.6028.4028.40139.7019.1045/8"3.78.1
3"80190.5023.90108.00127.0030.2030.20152.4019.1045/8"4.19
3-1/2"90216.0023.90122.20139.7031.8031.80177.8019.1085/8"5.111.2
4"100228.5023.90134.90157.2033.3033.30190.5019.1085/8"5.913
5"125254.0023.90163.60185.7036.6036.60215.9022.4083/4"715.4
6"150279.5025.40192.00215.9039.6039.60241.3022.4083/4"8.418.5
8"200343.0028.40246.10269.7044.5044.50298.5022.4083/4"1328.6
10"250406.5030.20304.80323.9049.3049.30362.0025.40127/8"1839.5
12"300482.5031.80365.30381.0055.6055.60431.8025.40127/8"2964
14"350533.5035.10400.10412.8057.2057.20476.3028.50121"3986
16"400597.0036.60457.20469.9063.5063.50539.8028.50161"47103
18"450635.0039.60505.00533.4068.3068.30577.9031.80161 1/8"57126
20"500698.5042.90558.80584.2073.2073.20635.0031.80201 1/8"76167
24"600813.0047.80663.40692.2082.6082.60749.3035.10201 1/4"97214

Applications:

Industry
Refineries90%
Oil and Gas Industry96%
Power Generation80%
Pharmaceutical Equipment85%
Pulp & Paper Industry88%