SS 321H THREADED FLANGES, MANUFACTURER OF ASTM A182 WP321 LAP JOINT FLANGES, READY STOCK OF SS 321 FLANGES, STAINLESS STEEL 321 SORF FLANGES, 321H SS LONG WELD NECK FLANGES SUPPLIER

Hariom Steel is a recognised manufacturer and distributor of SS 321 / 321H Flanges, which has good ductility and weld ability as well as outstanding high temperature characteristics. Due of the outstanding general qualities of this alloy, Stainless Steel UNS S32100 Blind Flanges is employed in a variety of sectors for a variety of various purposes. They are utilized in corrosion-resistant electrical enclosures, wheel covers, automotive molding and trim, culinary equipment, hose clamps, and other applications. Stainless Steel WNR 1.4541 Socket Weld Flanges is required in the most severely carburizing atmospheres of industrial heat treatment furnaces. Preheating is not required for this steel since the inter-pass temperature should not exceed 150° C. This steel is commonly used in exhaust manifolds, bellows, heat exchangers, oil refinery equipment, pulp paper and textile processing equipment, naval equipment, and so on.

Stainless Steel 321/321H Flanges Specifications

Size Chart1/2" (15 NB) to 48" (1200NB) DN10~DN5000
StandardsANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092
Pressure RatingClass 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Pressure Calculation in DIN6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64
UNI6Bar 10Bar 16Bar 25Bar 40Bar
EN6Bar 10Bar 16Bar 25Bar 40Bar
CoatingOil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized
Most common typesForged / Threaded / Screwed / Plate
Test CertificatesEN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Production TechniqueForged, Heat treated and machined
Connect Type/ Flange Face TypeRaised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove
Special design

As per your drawing

AS, ANSI, BS, DIN and JIS
15 NB (1/2") to 200 NB (8")
Equal and Reducing Configurations

TestDirect-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
EquipmentPress machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc
Manufacturer of

ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
-BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange

B.S: BS4504 , BS3293, BS1560, BS10
AS 2129: Table D; Table E; Table H
ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
American standard (ANSI)
German (DIN)
British standard (BS)

DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638 ASTM A182 F321/321H Stainless Steel Flanges
The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203; UNI2276

SS 321/321H Flanges Equivalent Grades

STANDARDWERKSTOFF NR.UNSJISEN
SS 3211.4541S32100SUS 321X6CrNiTi18-10
SS 321H1.4878S32109SUS 321HX12CrNiTi18-9

Stainless Steel 321/321H Flanges Chemical Composition

SS 3210.08 max2.0 max1.0 max0.045 max0.030 max17.00 – 19.000.10 max9.00 – 12.005(C+N) – 0.70 max
SS 321H0.04 – 0.102.0 max1.0 max0.045 max0.030 max17.00 – 19.000.10 max9.00 – 12.004(C+N) – 0.70 max

321/321H Stainless Steel Flanges Mechanical Properties

DensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation
8.0 g/cm31457 °C (2650 °F)Psi – 75000 , MPa – 515Psi – 30000 , MPa – 20535 %

Weight Chart Of Stainless Steel 321/321H Flanges

Pipe Normal Diam.O.D. Flange Thk. Of Flange Min Diam.
of
Hub 		Diameter of Raised Face Length Hub.YThread LengthDiam. 
of Bolt
Circle		Diam. 
of Bolt
Holes		Number
of Bolts		Diam. of
Bolts
(inch)		KGLB
inchdnOCXGYTBCBHBNBD
1/2"1589.0011.2030.2035.1015.7015.7060.5015.8041/2"0.40.9
3/4"2098.5012.7038.1042.9015.7015.7069.9015.8041/2"0.71.5
1"25108.0014.2049.3050.8017.5017.5079.3015.8041/2"0.81.8
1-1/4"32117.5015.7058.7063.5020.6020.6088.9015.8041/2"1.22.6
1-1/2"40127.0017.5065.0073.2022.4022.4098.6015.8041/2"1.53.3
2"50152.5019.1077.7091.9025.4025.40120.7019.1045/8"2.35.1
2-1/2"65178.0022.4090.40104.6028.4028.40139.7019.1045/8"3.78.1
3"80190.5023.90108.00127.0030.2030.20152.4019.1045/8"4.19
3-1/2"90216.0023.90122.20139.7031.8031.80177.8019.1085/8"5.111.2
4"100228.5023.90134.90157.2033.3033.30190.5019.1085/8"5.913
5"125254.0023.90163.60185.7036.6036.60215.9022.4083/4"715.4
6"150279.5025.40192.00215.9039.6039.60241.3022.4083/4"8.418.5
8"200343.0028.40246.10269.7044.5044.50298.5022.4083/4"1328.6
10"250406.5030.20304.80323.9049.3049.30362.0025.40127/8"1839.5
12"300482.5031.80365.30381.0055.6055.60431.8025.40127/8"2964
14"350533.5035.10400.10412.8057.2057.20476.3028.50121"3986
16"400597.0036.60457.20469.9063.5063.50539.8028.50161"47103
18"450635.0039.60505.00533.4068.3068.30577.9031.80161 1/8"57126
20"500698.5042.90558.80584.2073.2073.20635.0031.80201 1/8"76167
24"600813.0047.80663.40692.2082.6082.60749.3035.10201 1/4"97214

Applications:

Industry
Refineries90%
Oil and Gas Industry96%
Power Generation80%
Pharmaceutical Equipment85%
Pulp & Paper Industry88%